Fluke Vt Plus Gas Flow Analyzer Bio-Tek Analyser

Fluke Vt Plus Gas Flow Analyzer Bio-Tek Analyser
Fluke Vt Plus Gas Flow Analyzer Bio-Tek Analyser
Fluke Vt Plus Gas Flow Analyzer Bio-Tek Analyser
Fluke Vt Plus Gas Flow Analyzer Bio-Tek Analyser
Fluke Vt Plus Gas Flow Analyzer Bio-Tek Analyser
The VT PLUS is a general-purpose gas flow analyzer with special modes designed specifically for testing mechanical patient ventilators. The VT PLUS measures bi-directional flow in both high and low ranges as well as high- and low-pressure ranges.

Other features include:

Oxygen Concentration Measurement. An integrated sensor measures the oxygen percent of the gas in the high flow channel of the VT PLUS.
Breath Parameters. The VT PLUS measures 17 parameters on each detected breath. These parameters include tidal volume, minute volume, inspiratory and expiratory pressures, lung compliance, etc. Selectable Units. The VT PLUS allows the user to select the desired units for each of the measured signals. For example, pressures can be displayed in mmHg, kPa, bar, mbar, atm, inH2O, inHg, cmH2Oor mmHg.Leak Testing. The VT PLUS allows the user to test the leak rate of a sealed vessel or test lung. Trend Testing. The VT PLUS provides an automated test to see if a predetermined parameter deviates from limits set by the user.
Evaluations/Troubleshooting. The VT PLUS can be used for pre-purchase evaluations of ventilators, incoming and routine performance verification, and troubleshooting clinical


Leather on the handle has one side not tucked in, see picture
Our PriceUS$3,894.00
ConditionRefurbished
CodeFVTPLUS
Stock1
Weight29
No reviews